Drilling Milling Spindle Motor , Grease Lubricating Internal Grinding Spindles

Drilling Milling Spindle Motor , Grease Lubricating Internal Grinding Spindles

Warranty:

We offer one years warranty. Within warranty period, all exchanges or repairment due to defects are free (Buyer is responsible for shipping charges).

Specifications:

Electric current: 8A    Voltage: 380V     
Spindle mode: NYM100-9-24Z/3.0
Spindle parametric:                                    Overall size(mm):
Frequency: 800Hz                                       D: 100
Rotating speed: 9000-24000rpm                         D1: 78
Power: 3.0Kw                                           L: 220
                                             L1: 37
                                    L2: 31
Connect mode: ER20
Tool holder’s diameter: 1-13mm(Factory standard: 2 fillings)
Taper hole of spindle runout: ≤0.003mm
Mandrel runout: ≤0.008mm
Lubricating mode: grease
Cooling mode: water
Bearings mode: 2*7005   2*7003
Weight: 13KG

Description:
 

Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed. Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance The GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability. Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary. . The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.

Applications:

Applicable scope:  the circular carving and drilling and milling of the hardware This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for, glassworks and woodworks.

Product features:

1, Low noise, little vibration, good stability, high processing precision
2, Infinitely variable speed transmission for frequency changer with wide speed range
3, Adopt the ceramic core Aerial plug, more safe and reliable
4, Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; High rotating speed used for engraving and milling or fine machining. This product has wide application.
5, The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more longer.

After-sale protection:

Bearing warranty last for half a year,Machine quality assurance last for a year.

Notes for Use of 
Drilling Milling Spindle Motor , Grease Lubricating Internal Grinding Spindles